Softec

resonant tunneling diode

Vishay / SpragueBy ESPROS Photonics AGWith Omron Electronics Components

Shutterstock 84787564hover background

OP-16 or LLP-14 package, is priced at $2 each. The LM5030 comes in an MSOP-10 or LLP-10 package and is priced at $1.85 each in the same quantities.

During the T1E1 meeting, some of the Asian operators also voiced concern about having a DMT-only spec. In a document Infineon provided to T1E1, Korea Telecom, China Telecom, China Netcom, and Chungwa Telecom (Taiwan) all asked for T1E1 to support multiple line coding schemes. At this current stage we strongly object to having one line code selected, as this will limit our options in the future to use the best technology,” said Kim Young-Hyun, director of the Broadband Access Network Team at Korea Telecom.

Some believe that ASIC makers will use the structured ASIC to exact a quiet revenge on EDA vendors, competing directly with them in design services and intellectual-property (IP) libraries as well as tools. To maintain the full value of the structured-ASIC proposition over high-end FPGAs, this camp argues, ASIC vendors will have to keep tool prices low or even give tools away, much as Altera and Xilinx do in the programmable-logic space.

GRENOBLE — Temps d'assemblage divisé par deux et réduction des coûts jusqu'à 40% sur les systèmes d'automatisation industrielle : le nouveau dispositif AEAS-7000 d'Agilent Technologies « se différencie nettement des autres codeurs absolus », déclare Chong Khin Mien, vice-président de la Division Motion Control Products d'Agilent.

Fingerprint Cards AB

SIT1602BCR1-25S

Torex Semiconductor Ltd.By Tecate GroupWith ConductRF

During the T1E1 meeting, some of the Asian operators also voiced concern about having a DMT-only spec. In a document Infineon provided to T1E1, Korea Telecom, China Telecom, China Netcom, and Chungwa Telecom (Taiwan) all asked for T1E1 to support multiple line coding schemes. At this current stage we strongly object to having one line code selected, as this will limit our options in the future to use the best technology,” said Kim Young-Hyun, director of the Broadband Access Network Team at Korea Telecom.

Some believe that ASIC makers will use the structured ASIC to exact a quiet revenge on EDA vendors, competing directly with them in design services and intellectual-property (IP) libraries as well as tools. To maintain the full value of the structured-ASIC proposition over high-end FPGAs, this camp argues, ASIC vendors will have to keep tool prices low or even give tools away, much as Altera and Xilinx do in the programmable-logic space.

Some believe that ASIC makers will use the structured ASIC to exact a quiet revenge on EDA vendors, competing directly with them in design services and intellectual-property (IP) libraries as well as tools. To maintain the full value of the structured-ASIC proposition over high-end FPGAs, this camp argues, ASIC vendors will have to keep tool prices low or even give tools away, much as Altera and Xilinx do in the programmable-logic space.

GRENOBLE — Temps d'assemblage divisé par deux et réduction des coûts jusqu'à 40% sur les systèmes d'automatisation industrielle : le nouveau dispositif AEAS-7000 d'Agilent Technologies « se différencie nettement des autres codeurs absolus », déclare Chong Khin Mien, vice-président de la Division Motion Control Products d'Agilent.

Splashpower CEO John Halfpenny said: Our work with Celltronix will help to speed the availability of Splashpower-enabled devices and is an important step forward in our commercial programme.”

The low-voltage, high-current inductor has a low-profile design-it measures 13 x 13 x 6 mm-minimizing board real estate requirements and maximizing power density while providing excellent co-planarity, said Terry VanConant, power magnetics product manager for power components at parent company Tyco Electronics. The design of the DXM Series reduces failure modes often found with plating and solder-terminated wires and leads, and the multigap technology used to manufacture the device is said to reduce fringing flux and stray field emissions. The core material is not susceptible to thermal aging, the company said, and provides a mean time between failures of greater than 1 million hours of operation.

GeneSiC Semiconductor

multilayer inductor

WeidmullerBy MipotWith ETA-USA

GRENOBLE — Temps d'assemblage divisé par deux et réduction des coûts jusqu'à 40% sur les systèmes d'automatisation industrielle : le nouveau dispositif AEAS-7000 d'Agilent Technologies « se différencie nettement des autres codeurs absolus », déclare Chong Khin Mien, vice-président de la Division Motion Control Products d'Agilent.

Splashpower CEO John Halfpenny said: Our work with Celltronix will help to speed the availability of Splashpower-enabled devices and is an important step forward in our commercial programme.”

The low-voltage, high-current inductor has a low-profile design-it measures 13 x 13 x 6 mm-minimizing board real estate requirements and maximizing power density while providing excellent co-planarity, said Terry VanConant, power magnetics product manager for power components at parent company Tyco Electronics. The design of the DXM Series reduces failure modes often found with plating and solder-terminated wires and leads, and the multigap technology used to manufacture the device is said to reduce fringing flux and stray field emissions. The core material is not susceptible to thermal aging, the company said, and provides a mean time between failures of greater than 1 million hours of operation.

Other features with an accent on power saving include burst-mode operation (programmable using a single external resistor), quiescent current of 12 microamps, shutdown current of 1 microamps, programmable oscillator with sync output, programmable soft-start, anti-ringing control, thermal shutdown, adjustable current limit and power-good output comparator.

Melexis

B32620A3473J000

KEMETBy Chicago Electronic DistributorsWith RevX Systems

Splashpower CEO John Halfpenny said: Our work with Celltronix will help to speed the availability of Splashpower-enabled devices and is an important step forward in our commercial programme.”

The low-voltage, high-current inductor has a low-profile design-it measures 13 x 13 x 6 mm-minimizing board real estate requirements and maximizing power density while providing excellent co-planarity, said Terry VanConant, power magnetics product manager for power components at parent company Tyco Electronics. The design of the DXM Series reduces failure modes often found with plating and solder-terminated wires and leads, and the multigap technology used to manufacture the device is said to reduce fringing flux and stray field emissions. The core material is not susceptible to thermal aging, the company said, and provides a mean time between failures of greater than 1 million hours of operation.

Other features with an accent on power saving include burst-mode operation (programmable using a single external resistor), quiescent current of 12 microamps, shutdown current of 1 microamps, programmable oscillator with sync output, programmable soft-start, anti-ringing control, thermal shutdown, adjustable current limit and power-good output comparator.

Interconnect heat dissipation of the signal and clock nets cannot be ignored any more because of the smaller interconnect size and poorer thermal conductivity of low-k materials. Part of the wires could reach a temperature much higher than the substrate temperature during operation, causing signal integrity degradation or reliability problem. In our design flow, the RMS current of each signal or clock net is analyzed to determine the wire width and the amount of via needed. In this way, the methodology guarantees that the current induced temperature increase in the signal and clock nets is within the spec under the worst operating condition.

Memory Protection Devices

series vs.parallel circuit

EthertronicsBy Kioxia America, Inc.With Io Audio Technologies

The low-voltage, high-current inductor has a low-profile design-it measures 13 x 13 x 6 mm-minimizing board real estate requirements and maximizing power density while providing excellent co-planarity, said Terry VanConant, power magnetics product manager for power components at parent company Tyco Electronics. The design of the DXM Series reduces failure modes often found with plating and solder-terminated wires and leads, and the multigap technology used to manufacture the device is said to reduce fringing flux and stray field emissions. The core material is not susceptible to thermal aging, the company said, and provides a mean time between failures of greater than 1 million hours of operation.

Other features with an accent on power saving include burst-mode operation (programmable using a single external resistor), quiescent current of 12 microamps, shutdown current of 1 microamps, programmable oscillator with sync output, programmable soft-start, anti-ringing control, thermal shutdown, adjustable current limit and power-good output comparator.

Other features with an accent on power saving include burst-mode operation (programmable using a single external resistor), quiescent current of 12 microamps, shutdown current of 1 microamps, programmable oscillator with sync output, programmable soft-start, anti-ringing control, thermal shutdown, adjustable current limit and power-good output comparator.

Interconnect heat dissipation of the signal and clock nets cannot be ignored any more because of the smaller interconnect size and poorer thermal conductivity of low-k materials. Part of the wires could reach a temperature much higher than the substrate temperature during operation, causing signal integrity degradation or reliability problem. In our design flow, the RMS current of each signal or clock net is analyzed to determine the wire width and the amount of via needed. In this way, the methodology guarantees that the current induced temperature increase in the signal and clock nets is within the spec under the worst operating condition.

Furthermore, Elpida may add its firepower to the legal onslaught against Hynix. Since April, reports have circulated that Elpida may seek Japanese government action against imported Hynix chips on the same grounds as those cited by Micron and Infineon.

Identify now outputs VCD or VHDL models to third-party waveform viewers and comes with an open-source viewer based on GTK Wave.The company also offers Identify with single-vendor pricing. A single-vendor perpetual license starts at $15,000, while the single-vendor one-year license begins at $9,000. A mulivendor perpetual license of Identify starts at $25,000 and a one-year subscription at $15,000.

Murrplastik

TMM-136-01-T-D-RA-014

Interconnect heat dissipation of the signal and clock nets cannot be ignored any more because of the smaller interconnect size and poorer thermal conductivity of low-k materials. Part of the wires could reach a temperature much higher than the substrate temperature during operation, causing signal integrity degradation or reliability problem. In our design flow, the RMS current of each signal or clock net is analyzed to determine the wire width and the amount of via needed. In this way, the methodology guarantees that the current induced temperature increase in the signal and clock nets is within the spec under the worst operating condition.

Furthermore, Elpida may add its firepower to the legal onslaught against Hynix. Since April, reports have circulated that Elpida may seek Japanese government action against imported Hynix chips on the same grounds as those cited by Micron and Infineon.

Identify now outputs VCD or VHDL models to third-party waveform viewers and comes with an open-source viewer based on GTK Wave.The company also offers Identify with single-vendor pricing. A single-vendor perpetual license starts at $15,000, while the single-vendor one-year license begins at $9,000. A mulivendor perpetual license of Identify starts at $25,000 and a one-year subscription at $15,000.

dc motor driver

MS3470A14-4SW

Square D

Phasellus egestas accumsan laoreet. Tincidunt ipsum sit amet.
Simpson

Jonard Tools

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat. LabJack

TT Electronics / Optek Technology

At vero eos et accusam et justo duo dolores et ea rebum.
Cortina Systems

thermal switch symbol

    Loading Tweets..