There is no end of ways, it seems, that technology can improve our lives.

" />rectification circuit-ARM

Inventus Power

three phase common mode choke

TDK-EPCBy Electric ImpWith Aries Electronics, Inc.

Shutterstock 84787564hover background

As a stopgap effort, the company worked with Whitebarn Inc., an application developer since acquired by Talarian, to create a temporary thin-client application and an associated application for last-hop routers called URL Rendezvous Directory (URD). It provides source redirection features prior to the advanced source filtering offered in version 3. Once that version is offered in the next release, Falsetti said, URD will gradually disappear.

Reader Response

EDAC was kind enough to step into the void generated by Dataquest's exiting the EDA industry and organized the Sunday evening executive reception. The highlight of the reception was a panel combining representatives from four user companies and five vendor companies discussing different types of new chip design challenges to be encountered over the next two years. The panelists dealt with the subject in a polite, non-threatening manner, giving safe and known answers that did not challenge the audience to think differently about the known problems.(See coverage here). The event was, unfortunately, predictable: it delivered a review of the problems facing the industry, a realization that designers face greater challenges than before, and that EDA vendors have yet to find the silver bullet” that will provide a turkey solution to the issues.

In the first quarter, meanwhile, the world's second largest cell-phone supplier said its operating profits for these products were $49 million, a 41% decline over $83 million a year ago. Its cell-phone sales rose to $3.2 billion, a 24% jump over the like period last year. The company blamed the results on a shift in product mix toward lower-margin cell-phones and select component shortages. For some time, cell-phone makers have faced shortages of flash memories, SAW filters, and most recently, RF-chips and LCD driver ICs.

Altech Corporation

RT0805WRE0717R4L_Yageo_Chip Resistor - Surface Mount

IEIBy Talon Communications, Inc.With Digi-Key

Reader Response

EDAC was kind enough to step into the void generated by Dataquest's exiting the EDA industry and organized the Sunday evening executive reception. The highlight of the reception was a panel combining representatives from four user companies and five vendor companies discussing different types of new chip design challenges to be encountered over the next two years. The panelists dealt with the subject in a polite, non-threatening manner, giving safe and known answers that did not challenge the audience to think differently about the known problems.(See coverage here). The event was, unfortunately, predictable: it delivered a review of the problems facing the industry, a realization that designers face greater challenges than before, and that EDA vendors have yet to find the silver bullet” that will provide a turkey solution to the issues.

EDAC was kind enough to step into the void generated by Dataquest's exiting the EDA industry and organized the Sunday evening executive reception. The highlight of the reception was a panel combining representatives from four user companies and five vendor companies discussing different types of new chip design challenges to be encountered over the next two years. The panelists dealt with the subject in a polite, non-threatening manner, giving safe and known answers that did not challenge the audience to think differently about the known problems.(See coverage here). The event was, unfortunately, predictable: it delivered a review of the problems facing the industry, a realization that designers face greater challenges than before, and that EDA vendors have yet to find the silver bullet” that will provide a turkey solution to the issues.

In the first quarter, meanwhile, the world's second largest cell-phone supplier said its operating profits for these products were $49 million, a 41% decline over $83 million a year ago. Its cell-phone sales rose to $3.2 billion, a 24% jump over the like period last year. The company blamed the results on a shift in product mix toward lower-margin cell-phones and select component shortages. For some time, cell-phone makers have faced shortages of flash memories, SAW filters, and most recently, RF-chips and LCD driver ICs.

RELATED LINK: A Diamond among 1080p DLP HDTVs

Each process would then be implemented by a specific engine optimized for exactly what it does best. The control processes are implemented on the RISC engine, and the intensive signal processes are implemented on a dedicated DSP engine.

Tripp Lite

choke diagram

BluetechnixBy FLIR LeptonWith CW Industries

In the first quarter, meanwhile, the world's second largest cell-phone supplier said its operating profits for these products were $49 million, a 41% decline over $83 million a year ago. Its cell-phone sales rose to $3.2 billion, a 24% jump over the like period last year. The company blamed the results on a shift in product mix toward lower-margin cell-phones and select component shortages. For some time, cell-phone makers have faced shortages of flash memories, SAW filters, and most recently, RF-chips and LCD driver ICs.

RELATED LINK: A Diamond among 1080p DLP HDTVs

Each process would then be implemented by a specific engine optimized for exactly what it does best. The control processes are implemented on the RISC engine, and the intensive signal processes are implemented on a dedicated DSP engine.

Let me give you an example of how I used the results in a way I found valuable.Item 3 of the survey measures mindshare” of simulation tools. One of the featured tools is Modelsim from Mentor Graphics. John points out that while ModelSim had a mindshare” quotient of 41% in 2004 the values were 35% in 2005 and 35.3% in 2007.What conclusions can I reach from this data? Of course I must look at the total results for this item in order to frame my conclusions. What the results confirm is that Synopsys in the last three years has paid more attention to the simulation market than in the past. After all it was Synopsys that introduced SystemC and it was the same company that provided the vast majority of the technology for SystemVerilog. But Mentor, contrary to Cadence, has been very effective in updating and modifying ModelSim to address the needs of the market and thus has maintained its share of the engineers' minds.I also keep in mind John's disclaimer about the profile of his respondents and observe that ModelSim is a very popular simulator within the FPGA users market segment. Thus the total installed market for ModelSim is larger than the 35% share in the result. And finally I do not associate any negative connotation to the legacy” label, as some might tend to do. To me legacy IP or legacy tools continue to be used because of their intrinsic value, not just for convenience or laziness. So responses that state that ModelSim is being used for legacy reasons do not diminish the power and usefulness of the tool, in fact they augment it in my mind.

E-Z-Hook

RT0805CRB0731K6L_Yageo_Chip Resistor - Surface Mount

PanconBy Dutton-LainsonWith Korea Electric Terminal

RELATED LINK: A Diamond among 1080p DLP HDTVs

Each process would then be implemented by a specific engine optimized for exactly what it does best. The control processes are implemented on the RISC engine, and the intensive signal processes are implemented on a dedicated DSP engine.

Let me give you an example of how I used the results in a way I found valuable.Item 3 of the survey measures mindshare” of simulation tools. One of the featured tools is Modelsim from Mentor Graphics. John points out that while ModelSim had a mindshare” quotient of 41% in 2004 the values were 35% in 2005 and 35.3% in 2007.What conclusions can I reach from this data? Of course I must look at the total results for this item in order to frame my conclusions. What the results confirm is that Synopsys in the last three years has paid more attention to the simulation market than in the past. After all it was Synopsys that introduced SystemC and it was the same company that provided the vast majority of the technology for SystemVerilog. But Mentor, contrary to Cadence, has been very effective in updating and modifying ModelSim to address the needs of the market and thus has maintained its share of the engineers' minds.I also keep in mind John's disclaimer about the profile of his respondents and observe that ModelSim is a very popular simulator within the FPGA users market segment. Thus the total installed market for ModelSim is larger than the 35% share in the result. And finally I do not associate any negative connotation to the legacy” label, as some might tend to do. To me legacy IP or legacy tools continue to be used because of their intrinsic value, not just for convenience or laziness. So responses that state that ModelSim is being used for legacy reasons do not diminish the power and usefulness of the tool, in fact they augment it in my mind.

Geographically, North America remains Altera's strongest sales region, accounting for 57% of the total, up 48% from a year ago. Europe, at 23% of total sales, experienced 73% growth year-to-year, which Altera attributed to the region's strong communications focus. Japan declined slightly in the quarter, due to an inventory correction at a major customer, but was up 15% year-to-year, and 47% in new products, alone. Asia-Pacific also got a boost from new product sales, growing 55% from a year ago to represent 5% of Altera's total sales.

Micrel

pullup and pull down resistors

Quam NicholsBy VISATONWith Rieker Inc.

Each process would then be implemented by a specific engine optimized for exactly what it does best. The control processes are implemented on the RISC engine, and the intensive signal processes are implemented on a dedicated DSP engine.

Let me give you an example of how I used the results in a way I found valuable.Item 3 of the survey measures mindshare” of simulation tools. One of the featured tools is Modelsim from Mentor Graphics. John points out that while ModelSim had a mindshare” quotient of 41% in 2004 the values were 35% in 2005 and 35.3% in 2007.What conclusions can I reach from this data? Of course I must look at the total results for this item in order to frame my conclusions. What the results confirm is that Synopsys in the last three years has paid more attention to the simulation market than in the past. After all it was Synopsys that introduced SystemC and it was the same company that provided the vast majority of the technology for SystemVerilog. But Mentor, contrary to Cadence, has been very effective in updating and modifying ModelSim to address the needs of the market and thus has maintained its share of the engineers' minds.I also keep in mind John's disclaimer about the profile of his respondents and observe that ModelSim is a very popular simulator within the FPGA users market segment. Thus the total installed market for ModelSim is larger than the 35% share in the result. And finally I do not associate any negative connotation to the legacy” label, as some might tend to do. To me legacy IP or legacy tools continue to be used because of their intrinsic value, not just for convenience or laziness. So responses that state that ModelSim is being used for legacy reasons do not diminish the power and usefulness of the tool, in fact they augment it in my mind.

Let me give you an example of how I used the results in a way I found valuable.Item 3 of the survey measures mindshare” of simulation tools. One of the featured tools is Modelsim from Mentor Graphics. John points out that while ModelSim had a mindshare” quotient of 41% in 2004 the values were 35% in 2005 and 35.3% in 2007.What conclusions can I reach from this data? Of course I must look at the total results for this item in order to frame my conclusions. What the results confirm is that Synopsys in the last three years has paid more attention to the simulation market than in the past. After all it was Synopsys that introduced SystemC and it was the same company that provided the vast majority of the technology for SystemVerilog. But Mentor, contrary to Cadence, has been very effective in updating and modifying ModelSim to address the needs of the market and thus has maintained its share of the engineers' minds.I also keep in mind John's disclaimer about the profile of his respondents and observe that ModelSim is a very popular simulator within the FPGA users market segment. Thus the total installed market for ModelSim is larger than the 35% share in the result. And finally I do not associate any negative connotation to the legacy” label, as some might tend to do. To me legacy IP or legacy tools continue to be used because of their intrinsic value, not just for convenience or laziness. So responses that state that ModelSim is being used for legacy reasons do not diminish the power and usefulness of the tool, in fact they augment it in my mind.

Geographically, North America remains Altera's strongest sales region, accounting for 57% of the total, up 48% from a year ago. Europe, at 23% of total sales, experienced 73% growth year-to-year, which Altera attributed to the region's strong communications focus. Japan declined slightly in the quarter, due to an inventory correction at a major customer, but was up 15% year-to-year, and 47% in new products, alone. Asia-Pacific also got a boost from new product sales, growing 55% from a year ago to represent 5% of Altera's total sales.

The company continues to show strong growth in consumer segments, in part due to demand for its set-top-box chips from two major OEMs-General Instrument Corp. and Scientific-Atlanta Inc.

The chip is aimed at improving performance for Fibre Channel, handling up to 100,000 I/O operations per second, compared with less than 40,000 for typical Fibre Channel connections. To do that, there's a lot of parallelism between the hardware and the microcode,” said Yu-Ping Cheng, chief technical officer.

Simpson

RT1206WRD07267KL_Yageo_Chip Resistor - Surface Mount

Geographically, North America remains Altera's strongest sales region, accounting for 57% of the total, up 48% from a year ago. Europe, at 23% of total sales, experienced 73% growth year-to-year, which Altera attributed to the region's strong communications focus. Japan declined slightly in the quarter, due to an inventory correction at a major customer, but was up 15% year-to-year, and 47% in new products, alone. Asia-Pacific also got a boost from new product sales, growing 55% from a year ago to represent 5% of Altera's total sales.

The company continues to show strong growth in consumer segments, in part due to demand for its set-top-box chips from two major OEMs-General Instrument Corp. and Scientific-Atlanta Inc.

The chip is aimed at improving performance for Fibre Channel, handling up to 100,000 I/O operations per second, compared with less than 40,000 for typical Fibre Channel connections. To do that, there's a lot of parallelism between the hardware and the microcode,” said Yu-Ping Cheng, chief technical officer.

how capacitors are made

MMF25SDRE620K_Yageo_Chip Resistor - Surface Mount

Artesyn Embedded Power

Phasellus egestas accumsan laoreet. Tincidunt ipsum sit amet.
C-Max

Sharp Microelectronics

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat. BlueCreation

United Monolithic

At vero eos et accusam et justo duo dolores et ea rebum.
SL Power Electronics - Manufacturer of Condor / Ault Brands

aa lithium

    Loading Tweets..