How Long Does It Really Take to Drive 1,000 Miles?

Have you ever wondered how much time it would actually take to embark on an epic 1,000-mile journey by car? Buckle up and join me on this exhilarating ride as we uncover the truth behind this intriguing question. Picture yourself cruising along endless highways, the wind whispering through your hair, relishing the freedom of the open road. Will it be a relatively quick sprint, or a long and winding adventure? From bustling cities to serene landscapes, we’ll explore the factors that can affect your journey time. So, fasten your seatbelt, set your GPS, and get ready to discover the thrilling reality of how long it truly takes to conquer 1,000 miles of asphalt.

Factors Affecting Driving Time

Speed Limits and Traffic Conditions

One of the most significant factors affecting the time it takes to drive 1,000 miles is the speed limits and traffic conditions encountered along the journey. These variables can greatly impact the overall duration of the trip, as well as the driver’s ability to maintain a consistent pace. Here are some details to consider:

• Speed Limits: Each state and region typically has its own set of speed limits, which dictate how fast drivers are legally allowed to travel on different types of roads. It’s essential to adhere to these limits for safety reasons, but they can also influence the time it takes to reach the 1,000-mile mark. For instance, if the majority of the journey is on highways with higher speed limits, drivers may be able to cover the distance more quickly compared to driving through areas with lower speed limits on local roads.

• Traffic Congestion: The amount of traffic encountered during the trip can significantly impact travel time. Congested roads, particularly in urban areas or during peak travel times, can lead to delays and slower speeds. In such circumstances, drivers may need to navigate through heavy traffic, stop-and-go situations, or even encounter traffic accidents, which can considerably prolong the time it takes to reach the 1,000-mile mark.

• Road Construction: Construction zones can be another factor that affects driving time. These areas often come with reduced speed limits, narrowed lanes, and temporary detours, all of which can slow down traffic. Additionally, drivers may need to navigate around construction vehicles and workers, further increasing travel time.

• Weather Conditions: Inclement weather can also impact the time it takes to drive 1,000 miles. Heavy rain, snow, fog, or strong winds can decrease visibility and make roads more hazardous, requiring drivers to reduce their speed for safety reasons. Adverse weather conditions may also lead to road closures or detours, necessitating additional planning and potentially longer travel times.

Considering these factors, it becomes clear that speed limits and traffic conditions play a crucial role in determining the duration of a 1,000-mile drive. While it is impossible to predict the exact time it will take for each journey, understanding these variables can help drivers plan accordingly and anticipate potential delays along the way.

Road and Weather Conditions

The road and weather conditions play a significant role in determining how long it takes to drive 1,000 miles. These factors can greatly impact the overall travel time, as they directly affect the speed and safety of the journey. Here are some key points to consider when evaluating the influence of road and weather conditions on driving time:

1. Road Quality: The condition of the road surface can have a substantial impact on driving speed. Well-maintained and smooth roads generally allow for faster travel, while potholes, construction zones, or unpaved sections can slow down the journey. Additionally, traffic congestion and road closures due to accidents or maintenance can further extend the time required to cover the distance.

2. Terrain: The topography of the region through which the journey takes place can also affect driving time. Mountainous or hilly areas may necessitate slower speeds, particularly when navigating steep inclines or sharp curves. On the other hand, driving through flat or gently rolling terrain can enable faster travel.

3. Weather Conditions: Inclement weather conditions can significantly impact driving time and safety. Rain, snow, fog, or strong winds can reduce visibility and traction, requiring drivers to slow down and exercise caution. Adverse weather conditions can also lead to traffic delays, particularly when accidents occur or road closures are implemented for safety reasons.

4. Time of Year: Seasonal factors can influence driving time as well. Winter conditions, such as icy roads or snowstorms, may necessitate reduced speeds and longer travel times. Similarly, during summer months, road construction and increased traffic volumes due to vacations or holidays can result in slower progress.

5. Day or Night: The time of day can also affect driving time. Daylight hours generally provide better visibility, allowing for faster travel speeds. Nighttime driving, however, may require lower speeds due to reduced visibility and increased fatigue.

Considering these factors, it becomes clear that estimating the time it takes to drive 1,000 miles can be challenging. While optimal road and weather conditions may enable a faster journey, adverse circumstances can significantly extend the travel time. Thus, it is crucial for drivers to plan their trips accordingly and adjust their expectations based on the prevailing road and weather conditions.

Rest Stops and Breaks

When embarking on a long drive, it is essential to consider the need for rest stops and breaks along the way. These short breaks not only help to combat driver fatigue but also allow for necessary bodily functions and refreshment. The duration and frequency of these stops are factors that can significantly impact the overall time it takes to complete a 1,000-mile journey.

1. Duration of Rest Stops: The length of time spent at each rest stop can vary depending on individual preferences and needs. Some drivers may opt for quick pit stops, lasting only a few minutes, to stretch their legs and relieve themselves. Others may prefer more extended breaks, taking the opportunity to have a meal, rest, or even engage in recreational activities at designated rest areas. It is crucial to strike a balance between adequate rest and minimizing time spent at each stop to ensure efficient progress towards the final destination.

2. Frequency of Breaks: The frequency at which breaks are taken can greatly influence the overall time required to drive 1,000 miles. Some drivers may prefer shorter, more frequent breaks to maintain alertness and prevent muscle stiffness, while others may opt for more extended periods of continuous driving. It is important to note that taking too many breaks can significantly extend the total travel time, while driving for prolonged periods without breaks can lead to driver fatigue and decreased concentration.

3. Efficiency at Rest Stops: The efficiency with which rest stops are utilized can also impact the driving time. Drivers who plan ahead and make use of well-equipped rest areas with convenient amenities, such as clean restrooms, easily accessible food options, and fuel stations, may spend less time at each stop. On the other hand, drivers who encounter crowded or poorly maintained rest areas may experience delays in finding suitable facilities, resulting in longer stop times.

4. Traffic and Congestion: The amount of traffic and congestion encountered along the route can also affect the frequency and duration of rest stops. Heavy traffic can slow down the overall driving speed, making it necessary to take more breaks to prevent driver fatigue. Additionally, congested rest areas may lead to longer wait times for facilities, further extending the time spent at each stop.

In conclusion, when considering the time it takes to drive 1,000 miles, rest stops and breaks play a crucial role. The duration and frequency of these breaks, as well as the efficiency at rest stops and the presence of traffic and congestion, can all impact the overall driving time. It is essential for drivers to plan their breaks strategically, finding a balance between rest and progress towards their destination.

Calculating Driving Time

Average Driving Speed

When it comes to calculating driving time for a 1,000-mile journey, the average driving speed plays a crucial role. This factor determines how quickly or slowly you can cover the distance. However, it’s important to note that the average driving speed can vary widely depending on several factors, including road conditions, traffic congestion, and the driver’s comfort level.

To estimate the driving time accurately, it’s essential to consider the following factors:

1. Speed Limits: Each roadway has its own designated speed limits, which are typically set to ensure safety for all drivers. Adhering to these limits is not only important for obeying the law but also for maintaining a smooth flow of traffic. It’s worth noting that exceeding the speed limit can result in penalties and, more importantly, an increased risk of accidents.

2. Traffic Conditions: Congestion on the roads can significantly impact your driving speed. Rush hour traffic, road construction, accidents, and other variables can cause delays and reduce your average driving speed. It’s advisable to check for traffic updates before embarking on a long journey to anticipate potential delays and plan accordingly.

3. Driver Comfort Level: Each driver has their own preferred driving speed based on their experience and comfort level. Some drivers may feel more at ease driving at a steady pace, while others may prefer to drive faster. It’s important to find a speed that allows you to maintain control of the vehicle and feel safe throughout the journey.

4. Rest Stops: Taking breaks during a long drive is essential for both safety and driver comfort. It’s important to factor in rest stops when calculating driving time. These breaks not only allow you to stretch your legs and re-energize but also help combat driver fatigue, which can impair your driving abilities.

Calculating the average driving speed involves dividing the total distance (1,000 miles) by the estimated driving time. However, it’s crucial to keep in mind that the estimated driving time may not always align with the actual time it takes to complete the journey. External variables such as weather conditions, unexpected road closures, and detours can all affect the overall driving time.

To ensure a more accurate estimate, it’s advisable to consider the factors mentioned above and make adjustments accordingly. By doing so, you can better plan your journey and arrive at your destination in a timely and safe manner.

Distance and Time Calculation

When it comes to calculating the driving time for a distance of 1,000 miles, there are a few factors to consider. One of the key elements in this calculation is the average speed at which you will be traveling. To determine the driving time, you need to divide the distance by the average speed.

Here’s a breakdown of how to calculate the driving time:

1. Determine the average speed: The average speed can vary depending on several factors, such as road conditions, traffic, and the type of vehicle you are driving. It is essential to consider these factors to get a more accurate estimation.

2. Convert the distance to a common unit: If the distance is given in a unit other than miles, such as kilometers, it is necessary to convert it to miles before proceeding with the calculation. This can be done by using the appropriate conversion factor.

3. Divide the distance by the average speed: Once you have the average speed and the distance in miles, you can divide the distance by the average speed to obtain the driving time. Keep in mind that this calculation assumes a constant speed throughout the journey, which may not always be the case in real-world driving conditions.

4. Factor in additional time: While the driving time calculation provides an estimate, it is essential to consider additional factors that may affect the overall time it takes to reach your destination. These factors can include rest stops, meal breaks, refueling, and unexpected delays due to road closures or traffic congestion.

By following these steps, you can get a rough estimate of the time it would take to drive 1,000 miles. However, it is important to remember that this estimation is based on ideal conditions and may not necessarily reflect the actual time it would take in real-world scenarios.

Potential Delays and Adjustments

Driving 1,000 miles may seem like a straightforward task, but various factors can contribute to potential delays and adjustments along the way. It is crucial to consider these factors when calculating the actual time it takes to cover such a distance. Here are some key points to keep in mind:

1. Traffic Congestion: One of the most significant factors that can affect driving time is traffic congestion. Heavy traffic can slow down your progress and add significant time to your journey. This is especially true in densely populated areas or during peak travel times such as rush hour. It is important to account for potential delays caused by traffic congestion when estimating the time it will take to drive 1,000 miles.

2. Road Conditions: The condition of the roads you’ll be traveling on can also impact your driving time. Poorly maintained roads, construction zones, or inclement weather can all slow you down and require adjustments to your estimated time of arrival. It’s essential to be aware of any road closures or detours along your route and factor them into your calculations.

3. Rest Breaks: Long-distance driving can be physically and mentally demanding. It is crucial to take regular rest breaks to ensure your safety and well-being. Fatigue can impair your driving abilities and increase the risk of accidents. Therefore, it is recommended to schedule regular breaks, especially for trips that cover 1,000 miles or more. These breaks allow you to stretch your legs, refuel, and rest, ultimately contributing to your overall driving time.

4. Fuel and Food Stops: Another factor that can affect your driving time is the need to stop for fuel and food. Depending on your vehicle’s fuel efficiency, you may need to make several stops to refuel during your journey. Additionally, taking breaks to eat and recharge can be essential for your comfort and alertness. These stops should be factored into your calculations to provide a realistic estimate of the time it will take to drive 1,000 miles.

5. Unforeseen Circumstances: Despite careful planning, there may be unforeseen circumstances that can impact your driving time. These can include accidents, road closures due to emergencies, or unexpected weather conditions. While it is impossible to predict these events, it is important to be prepared for them and to adjust your driving time accordingly.

Taking into account these potential delays and adjustments can help you calculate a more accurate estimate of the time it will take to drive 1,000 miles. By factoring in traffic congestion, road conditions, rest breaks, fuel and food stops, and unforeseen circumstances, you can better plan your journey and manage your expectations. Remember, driving long distances requires patience, awareness, and adaptability to ensure a safe and enjoyable travel experience.

Real-Life Scenarios

Interstate Highways

When it comes to driving long distances, interstate highways are often the preferred choice for many travelers. These highways are designed to allow for higher speed limits and smoother driving conditions, making them ideal for covering large distances in a relatively shorter amount of time. However, various factors can influence the actual time it takes to drive 1,000 miles on an interstate highway.

Here are some key details to consider when estimating the time it takes to drive 1,000 miles on interstate highways:

1. Speed Limits: Interstate highways typically have higher speed limits compared to other types of roads. In the United States, the speed limits on interstate highways can vary from state to state, but they commonly range from 65 to 75 miles per hour (mph). Higher speed limits allow for quicker travel times, but it’s important to adhere to these limits for safety reasons.

2. Traffic Conditions: The amount of traffic on the interstate can significantly impact travel time. During peak hours or in heavily populated areas, congestion and slower speeds can cause delays. On the other hand, driving during off-peak hours or in less populated regions can result in smoother traffic flow and faster travel times.

3. Rest Stops and Services: Interstate highways are well-equipped with rest stops, gas stations, and convenience stores. Taking breaks for refueling, restroom breaks, or grabbing a quick snack can add to the overall travel time. However, these stops are essential for driver comfort, safety, and vehicle maintenance, so it’s important to factor them into the estimated time.

4. Weather Conditions: Inclement weather, such as heavy rain, snowstorms, or strong winds, can significantly impact driving conditions and slow down travel time. It’s crucial to consider the weather forecast before embarking on a long-distance drive and adjust the estimated time accordingly.

5. Driver Preferences: Each driver has their own preferred driving style and habits, which can influence travel time. Some drivers may prefer to drive at a steady pace without taking many breaks, while others may prefer to take frequent rest stops to stretch their legs and relax. Personal preferences should be taken into account when estimating the time it takes to drive 1,000 miles.

Overall, driving 1,000 miles on interstate highways can vary in time depending on factors such as speed limits, traffic conditions, rest stops, weather, and driver preferences. While it is impossible to provide an exact time frame due to the variability of these factors, understanding these considerations can help travelers plan their journey more effectively.

Rural Routes and Mountainous Terrain

Driving 1,000 miles on rural routes and mountainous terrain can significantly impact the time it takes to complete the journey. The winding roads, steep inclines, and limited passing opportunities all contribute to a slower pace. Here are some factors to consider:

1. Road Conditions: Rural routes may have rough surfaces or potholes, which can slow down your speed and require cautious driving. Additionally, mountainous terrain often means narrow roads and sharp turns, demanding increased attention and reduced speeds.

2. Speed Limits: Rural areas often have lower speed limits compared to highways, especially on winding roads or near residential areas. Mountainous regions may also have reduced speed limits due to the challenging topography. Adhering to these speed limits ensures safety but can prolong your travel time.

3. Traffic Density: In rural areas, traffic density is generally lower compared to urban areas. However, this doesn’t mean you won’t encounter slow-moving vehicles or farm equipment on narrow roads. These obstacles can further extend your journey time, especially if passing opportunities are limited.

4. Weather Conditions: Rural areas and mountainous regions are susceptible to different weather conditions, such as fog, rain, or snow. Inclement weather can lead to reduced visibility, slippery roads, and the need to drive at slower speeds. Always check the weather forecast before embarking on your journey and adjust your driving accordingly.

5. Rest Stops and Amenities: On rural routes, finding rest stops, gas stations, or food establishments can be challenging. Planning your stops in advance and ensuring you have enough fuel and provisions is crucial to avoid unnecessary delays.

6. Scenic Stops and Sightseeing: Rural areas and mountainous regions often offer breathtaking views and scenic spots. If you plan to make stops to enjoy the surroundings or take photographs, remember to factor in this additional time into your overall travel duration.

Driving 1,000 miles on rural routes and mountainous terrain can take significantly longer compared to driving on highways or urban roads. The unpredictable nature of these areas, combined with the need for cautious driving, means that completing the distance may require more time than expected. It is essential to plan accordingly, allowing for extra time to ensure a safe and enjoyable journey.

City Driving and Traffic Congestion

City driving can significantly impact the time it takes to drive 1,000 miles. The presence of traffic congestion, stoplights, and the constant flow of pedestrians can all contribute to delays on the road. Here are some key points to consider when estimating the time it takes to drive 1,000 miles in a city environment:

• Traffic congestion: Heavy traffic can significantly slow down the average speed of a vehicle. Stop-and-go traffic, especially during peak hours, can lead to frustrating delays. It is crucial to take into account the potential for congestion when calculating the time it would take to drive 1,000 miles in a city.

• Stoplights: City driving often involves navigating through numerous stoplights. Each stoplight adds a brief pause to the journey, further extending the overall travel time. The frequency of stoplights in a city can vary, but it is essential to consider their impact on the overall driving time.

• Pedestrian activity: Cities are typically bustling with pedestrians, particularly in busy areas or during events. Pedestrian crosswalks and intersections can cause additional delays as drivers must wait for individuals to cross the road. The presence of pedestrians can further slow down the pace of city driving, affecting the time required to cover 1,000 miles.

• Road conditions: City roads are subject to wear and tear due to heavy traffic volume. Potholes, construction zones, and other road hazards can lead to slower speeds and potential detours. It is important to factor in these conditions when estimating the time it takes to drive 1,000 miles in a city environment.

Considering these factors, it is clear that city driving and traffic congestion can significantly impact the time it takes to drive 1,000 miles. The actual duration will vary depending on the specific city, time of day, and other variables. However, it is safe to say that driving 1,000 miles in a city environment will generally take longer compared to driving the same distance on open highways.

Tips for Efficient and Enjoyable Road Trips

Plan Your Route and Stops

When embarking on a road trip, especially one that involves covering a substantial distance like 1,000 miles, it is crucial to plan your route and stops in advance. This not only helps ensure a smoother journey but also allows you to make the most of your time and enjoy the experience to the fullest. Here are some tips to help you efficiently plan your route and stops:

1. Choose the most direct route: Consider the primary highways and interstates that will take you from your starting point to your destination. Opt for the route that offers the shortest distance and least amount of detours. This will help minimize the overall time spent on the road.

2. Factor in traffic and road conditions: While choosing your route, take into account any potential traffic congestion or road closures. Consult live traffic updates and road condition reports to avoid unnecessary delays and detours. Planning your departure time accordingly can also help you avoid peak traffic hours.

3. Identify rest stops and attractions: Along your route, pinpoint rest stops, gas stations, and restaurants where you can take breaks and refuel. Additionally, research any interesting attractions or landmarks that you may want to visit along the way. This can add a sense of adventure to your journey and break up the monotony of driving.

4. Consider overnight stays: Depending on the distance you need to cover, it may be necessary to plan for overnight stays. Look for accommodations such as hotels or campgrounds that are conveniently located along your route. Booking these in advance can save you time and ensure you have a comfortable place to rest.

5. Allocate time for unforeseen delays: While planning your stops and estimating travel time, it is essential to factor in potential delays. These could include traffic congestion, road construction, or unexpected detours. By allocating extra time for such delays, you can minimize stress and maintain a more relaxed pace during your journey.

By carefully planning your route and stops, you can optimize your travel time and make the most of your 1,000-mile road trip. Remember to stay flexible and adapt your schedule as needed, but having a well-thought-out plan will undoubtedly enhance your overall experience. So, take the time to map out your journey, and get ready for an adventure on the open road!

Maintain a Comfortable Driving Pace

When embarking on a road trip, it is essential to maintain a comfortable driving pace to ensure a smooth and enjoyable journey. However, determining the optimal speed can be a challenging task, especially when aiming to cover a significant distance like driving 1,000 miles. Here are some tips to help you maintain a comfortable driving pace:

1. Consider the speed limit: Adhering to the posted speed limits is not only crucial for your safety but also helps you maintain a steady pace. Different areas may have varying speed limits, so it is essential to be aware of and abide by the laws of the region you are driving through.

2. Factor in traffic conditions: Traffic congestion can significantly impact your travel time. Before hitting the road, check for any potential delays or road closures along your route. Utilize navigation apps or websites that provide real-time traffic updates to help you plan your journey accordingly.

3. Take breaks: Long drives can be tiring, and fatigue can slow down your pace. It is vital to take regular breaks to rest, stretch your legs, and recharge. Plan your stops strategically, and aim for every couple of hours or whenever you feel the need for a break. This will not only help you maintain focus but also ensure your driving pace remains consistent.

4. Consider the terrain: The type of terrain you encounter on your road trip can significantly influence your driving speed. If you are driving through mountainous or hilly areas, it is important to adjust your speed accordingly to navigate the challenging terrain safely. Similarly, if you are driving on flat and straight highways, you may be able to maintain a slightly faster pace.

5. Account for weather conditions: Inclement weather can slow down your driving pace and pose additional challenges. Rain, snow, or fog can reduce visibility and make roads slippery, necessitating slower speeds. Always check the weather forecast before your trip and adjust your driving pace accordingly to ensure safety.

By considering these factors and maintaining a comfortable driving pace, you can have a more enjoyable and efficient road trip experience when covering a distance of 1,000 miles. Remember, it’s not just about reaching your destination quickly, but also enjoying the journey along the way.

Take Breaks and Stay Alert

One important aspect of driving long distances is to take regular breaks and stay alert. This not only ensures your safety but also allows you to enjoy the journey without feeling fatigued. Here are some tips to help you stay fresh and focused on the road:

• Plan your breaks: Before embarking on your road trip, plan where you will take breaks along the way. This will help you schedule your driving time and allow for sufficient rest stops. Aim to take breaks every two to three hours or whenever you start feeling tired.

• Stretch and walk around: When you stop for a break, make sure to stretch your legs and walk around. Sitting for extended periods can cause muscle stiffness and discomfort. Take a short stroll to get your blood flowing and loosen up your muscles.

• Stay hydrated: Dehydration can quickly lead to fatigue and reduced concentration. Make sure to drink plenty of water throughout your journey. Consider carrying a reusable water bottle with you to ensure you have access to hydration at all times.

• Snack wisely: Opt for healthy snacks that provide sustained energy rather than sugary or greasy treats. Foods high in protein, such as nuts or yogurt, can help keep you alert and satisfied during your drive. Avoid heavy meals that might make you feel sluggish.

• Engage in mental stimulation: To stay focused while driving, engage in mental activities that keep your mind active. This can include listening to podcasts, audiobooks, or educational lectures. Avoid activities that may distract you or make you lose concentration, such as watching videos or engaging in lengthy phone conversations.

• Get enough sleep: Before setting off on a long drive, ensure you have had enough rest the night before. Lack of sleep can impair your judgment and reaction times, making driving dangerous. Aim for at least seven to eight hours of quality sleep to ensure you’re well-rested for the journey.

By following these tips and taking regular breaks, you can maintain your alertness and enjoy a safe and pleasant road trip. Remember, it’s not just about reaching your destination, but also embracing the journey along the way.

FAQs: How Long Does It Really Take to Drive 1,000 Miles?

How long would it take to drive 1,000 miles without stopping?

The time it would take to drive 1,000 miles without stopping varies depending on various factors such as the speed limit, traffic conditions, and your average driving speed. Assuming you are driving on highways and maintaining a constant speed, you can estimate the time it would take by dividing the total distance by your average speed. For example, if you maintain an average speed of 60 miles per hour, it would take approximately 16.7 hours to drive 1,000 miles without stopping.

How long would it take to drive 1,000 miles with breaks?

If you plan on taking breaks during your journey, the total time it takes to drive 1,000 miles would naturally be longer. The duration of these breaks will vary depending on your personal needs and preferences, as well as the availability of rest stops or attractions along your route. It is recommended to plan for rest breaks every few hours to ensure driver alertness and to prevent fatigue. Consequently, the overall time it would take to drive 1,000 miles with breaks can vary significantly, but a rough estimate could be around 18 to 20 hours.

Can driving conditions affect the time it takes to drive 1,000 miles?

Yes, driving conditions can significantly affect the time it takes to drive 1,000 miles. Factors such as traffic congestion, road construction, adverse weather conditions, and time of day can all impact your travel time. These conditions can cause delays, require you to drive at slower speeds, or even necessitate detours, thus increasing the overall duration of your journey. It is always a good idea to check for traffic updates and weather forecasts before embarking on a long drive to anticipate and plan for any potential obstacles.

Are there legal restrictions on how long you can drive without taking a break?

Yes, there are legal restrictions on how long you can drive without taking a break, particularly for commercial drivers. These regulations, known as hours of service rules, are implemented to ensure driver safety and prevent fatigue-related accidents. The specifics vary between countries and regions, but for example, in the United States, a typical regulation for commercial drivers allows a maximum driving time of 11 hours within a 14-hour work period, followed by a mandatory 10-hour break. It is crucial to comply with these regulations, as they not only prioritize safety but also contribute to a more efficient and comfortable driving experience.

Is driving 1,000 miles in one day recommended?

Driving 1,000 miles in one day is possible, but it may not be recommended or advisable for everyone. It is important to prioritize road safety and personal well-being while undertaking long drives. Factors such as driver fatigue, increased risk of accidents due to prolonged focus, and reduced alertness should be taken into consideration. It is generally advisable to break up longer journeys over multiple days or make stops along the way to rest and recharge, especially if you are not accustomed to driving long distances in a single day.

Driving 1000 Miles in 3 Cars: Gas vs Electric!